DIFFERENCES FROM RFC: Implemented most of the changes suggested by Jiri and others. Thanks for the valuable feedback!
Adds a devlink command for getting & setting permanent (persistent / NVRAM) device configuration parameters, and enumerates the parameters as nested devlink attributes. bnxt driver patches make use of these new devlink cmds/ attributes. Steve Lin (7): devlink: Add permanent config parameter get/set operations devlink: Adding NPAR permanent config parameters devlink: Adding high level dev perm config params devlink: Adding perm config of link settings devlink: Adding pre-boot permanent config parameters bnxt: Move generic devlink code to new file bnxt: Add devlink support for config get/set drivers/net/ethernet/broadcom/bnxt/Makefile | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 + drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c | 363 ++++++++++++++++++++++ drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h | 56 ++++ drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h | 100 ++++++ drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c | 53 +--- drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.h | 37 +-- include/net/devlink.h | 4 + include/uapi/linux/devlink.h | 113 +++++++ net/core/devlink.c | 300 ++++++++++++++++++ 10 files changed, 944 insertions(+), 85 deletions(-) create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c create mode 100644 drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h -- 2.7.4
