> @@ -0,0 +1,25 @@
> +Intel Platform Controller Hub (PCH) GigaBit Ethernet (GBE)
> +
> +Required properties:
> +- compatible:                Should be the PCI vendor & device ID, eg. 
> "pci8086,8802".
> +- reg:                       Should be a PCI device number as specified by 
> the PCI bus
> +                     binding to IEEE Std 1275-1994.
> +- phy-reset-gpios:   Should be a GPIO list containing a single GPIO that
> +                     resets the attached PHY when active.
> +

Hi Paul

Please see Documentation/devicetree/bindings/net/phy.txt. In
particular:

reset-gpios: The GPIO phandle and specifier for the PHY reset signal.

You should be conforming to the existing binding.

   Andrew

Reply via email to