The Allwinner R40 SoC has the EMAC controller supported by dwmac-sun8i.
It is named "GMAC", while EMAC refers to the 10/100 Mbps Ethernet
controller supported by sun4i-emac. The controller is the same, but
the R40 has the glue layer controls in the clock control unit (CCU),
with a reduced RX delay chain, and no TX delay chain.
This patch adds the R40 specific bits to the dwmac-sun8i binding.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index 74b3ef79e57a..fe4a48a1eb50 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -7,6 +7,7 @@ Required properties:
- compatible: must be one of the following string:
"allwinner,sun8i-a83t-emac"
"allwinner,sun8i-h3-emac"
+ "allwinner,sun8i-r40-gmac"
"allwinner,sun8i-v3s-emac"
"allwinner,sun50i-a64-emac"
- reg: address and length of the register for the device.
@@ -24,14 +25,17 @@ Required properties:
compatible string:
- allwinner,sun8i-a83t-system-controller
- allwinner,sun8i-h3-system-controller
+ - allwinner,sun8i-r40-ccu
- allwinner,sun8i-v3s-system-controller
- allwinner,sun50i-a64-system-controller
Optional properties:
- allwinner,tx-delay-ps: TX clock delay chain value in ps.
Range is 0-700. Default is 0.
+ Unavailable for allwinner,sun8i-r40-gmac
- allwinner,rx-delay-ps: RX clock delay chain value in ps.
Range is 0-3100. Default is 0.
+ Range is 0-700 for allwinner,sun8i-r40-gmac
Both delay properties need to be a multiple of 100. They control the
clock delay for external RGMII PHY. They are do apply to the internal
PHY or external non-RGMII PHYs.
--
2.16.2
