Hi, "Brown, Aaron F" <aaron.f.br...@intel.com> writes:
>> From: Intel-wired-lan [mailto:intel-wired-lan-boun...@osuosl.org] On >> Behalf Of Vinicius Costa Gomes >> Sent: Thursday, March 29, 2018 2:08 PM >> To: intel-wired-...@lists.osuosl.org >> Cc: netdev@vger.kernel.org; Sanchez-Palencia, Jesus <jesus.sanchez- >> palen...@intel.com> >> Subject: [Intel-wired-lan] [next-queue PATCH v6 08/10] igb: Add MAC >> address support for ethtool nftuple filters >> >> This adds the capability of configuring the queue steering of arriving >> packets based on their source and destination MAC addresses. >> >> In practical terms this adds support for the following use cases, >> characterized by these examples: >> >> $ ethtool -N eth0 flow-type ether dst aa:aa:aa:aa:aa:aa action 0 >> (this will direct packets with destination address "aa:aa:aa:aa:aa:aa" >> to the RX queue 0) > > This is now working for me, testing with the dst MAC being the MAC on the > i210. I set the filter and all the traffic to the destination MAC address > gets routed to the chosen RX queue. > >> $ ethtool -N eth0 flow-type ether src 44:44:44:44:44:44 action 3 >> (this will direct packets with source address "44:44:44:44:44:44" to >> the RX queue 3) > > However, I am still not getting the raw ethernet source filter to > work. Even back to back with no other system to "confuse" the stream, > I set the filter so the source MAC is the same as the MAC on the link > partner, send traffic and the traffic bounces around the queues as if > the filter is not set. It seems there is at least a documentation issue in the i210 datasheet, steering (placing traffic into a specific queue) by source address doesn't work, filtering (accepting the traffic based on some rule) does work. I pointed this out in the cover letter of v5 as a known issue, but forgot to repeat it for v6, sorry about the confusion. But only the filtering part is useful, I think, it enables cases like this: $ ethtool -N enp2s0 flow-type ether src 68:05:ca:4a:c9:73 proto 0x22f0 action 3 I added that note in the hope that someone else would have an stronger opinion about what to do. Anyway, my plan for now will be to document this better and turn the case that only the source address is specified into an error. > >> >> Signed-off-by: Vinicius Costa Gomes <vinicius.go...@intel.com> >> --- >> drivers/net/ethernet/intel/igb/igb_ethtool.c | 35 >> ++++++++++++++++++++++++---- >> 1 file changed, 31 insertions(+), 4 deletions(-) Cheers, -- Vinicius
