> +static int bgx_port_get_qlm_speed(struct bgx_port_priv *priv, int qlm)
> +{
> + enum lane_mode lmode;
> + u64 data;
> +
> + data = oct_csr_read(GSER_LANE_MODE(priv->node, qlm));
> + lmode = data & 0xf;
> +
> + switch (lmode) {
> + case R_25G_REFCLK100:
> + return 2500;
> + case R_5G_REFCLK100:
> + return 5000;
> + case R_8G_REFCLK100:
> + return 8000;
> + case R_125G_REFCLK15625_KX:
> + return 1250;
> + case R_3125G_REFCLK15625_XAUI:
> + return 3125;
> + case R_103125G_REFCLK15625_KR:
> + return 10312;
> + case R_125G_REFCLK15625_SGMII:
> + return 1250;
> + case R_5G_REFCLK15625_QSGMII:
> + return 5000;
> + case R_625G_REFCLK15625_RXAUI:
> + return 6250;
> + case R_25G_REFCLK125:
> + return 2500;
> + case R_5G_REFCLK125:
> + return 5000;
> + case R_8G_REFCLK125:
> + return 8000;
> + default:
> + return 0;
> + }
> + struct port_status status;
> + int speed;
> +
> + /* The simulator always uses a 1Gbps full duplex port */
> + if (octeon_is_simulation()) {
> + status.link = 1;
> + status.duplex = DUPLEX_FULL;
> + status.speed = 1000;
> + } else {
> + /* Use the qlm speed */
> + speed = bgx_port_get_qlm_speed(priv, priv->qlm);
> + status.link = 1;
> + status.duplex = DUPLEX_FULL;
> + status.speed = speed * 8 / 10;
> + }
Hi Steve
That looks like it gives some odd speeds.
2500 * 8 / 10 = 2Gbps
5000 * 8 / 10 = 4Gbps
8000 * 8 / 10 = 6.4Gbps
10312 * 8 /10 = 8.249Gbps
Is this correct. We are more used to 10/100/1000/2.5G/5G/10G/40G/100G.
Andrew
