Fri, Sep 04, 2020 at 07:39:54AM CEST, [email protected] wrote: > > >> -----Original Message----- >> From: Jakub Kicinski <[email protected]> >> Sent: Friday, September 4, 2020 12:48 AM >> To: [email protected] >> Cc: [email protected]; [email protected]; Sunil Kovvuri Goutham >> <[email protected]>; Subbaraya Sundeep Bhatta >> <[email protected]> >> Subject: [EXT] Re: [net-next PATCH 0/2] Introduce mbox tracepoints for >> Octeontx2 >> >> External Email >> >> ---------------------------------------------------------------------- >> On Thu, 3 Sep 2020 12:48:16 +0530 [email protected] wrote: >> > From: Subbaraya Sundeep <[email protected]> >> > >> > This patchset adds tracepoints support for mailbox. >> > In Octeontx2, PFs and VFs need to communicate with AF for allocating >> > and freeing resources. Once all the configuration is done by AF for a >> > PF/VF then packet I/O can happen on PF/VF queues. When an interface is >> > brought up many mailbox messages are sent to AF for initializing >> > queues. Say a VF is brought up then each message is sent to PF and PF >> > forwards to AF and response also traverses from AF to PF and then VF. >> > To aid debugging, tracepoints are added at places where messages are >> > allocated, sent and message interrupts. >> > Below is the trace of one of the messages from VF to AF and AF >> > response back to VF: >> >> Could you use the devlink tracepoint? trace_devlink_hwmsg() ? > >Thanks for the suggestion. >In our case the mailbox is central to 3 different drivers and there would be a >4th one >once crypto driver is accepted. We cannot add devlink to all of them inorder >to use >the devlink trace points.
I guess you have 1 pci device, right? Devlink instance is created per pci device. > >Thanks, >Sunil.
