STM32F429 Chip embeds a Synopsys 3.50a MAC IP. This series: -enhance current stmmac driver to control it (code already available) and adds basic glue for STM32F429 chip. -Enable basic Net config in kernel.
Note that DT patches are not present because STM32 pinctrl code is not yet avalaible. Changes since v2: -Fix alphabetic order in Kconfig and Makefile. -Improve code according to Joachim review. -Binding: remove useless entry. Changes since v1: -Fix Kbuild issue in Kconfig. -Remove init/exit callbacks. Suspend/Resume and remove driver is no more driven in stmmac_pltfr but directly in dwmac-stm32 glue driver. -Take into account Joachim review. Regards. Alexandre. Alexandre TORGUE (4): net: ethernet: dwmac: add Ethernet glue logic for stm32 chip Documentation: Bindings: Add STM32 DWMAC glue net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP ARM: STM32: Enable Ethernet in stm32_defconfig .../devicetree/bindings/net/stm32-dwmac.txt | 40 +++++ arch/arm/configs/stm32_defconfig | 9 + drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++ drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 193 +++++++++++++++++++++ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + 6 files changed, 256 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c -- 1.9.1
