Send netdisco-users mailing list submissions to
netdisco-users@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/netdisco-users
or, via email, send a message with subject or body 'help' to
netdisco-users-requ...@lists.sourceforge.net
You can reach the person managing the list at
netdisco-users-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of netdisco-users digest..."
Today's Topics:
1. Re: get all IP from device / distributed netdisco (Oliver Gorwits)
--- Begin Message ---
Hi Antoine
I can't easily answer to your problem with the Avaya switch - it sounds
like an issue pulling the VLAN table and then also layer three support on
your router is not revealing all the MAC-IP pairs. Perhaps opening a ticket
on GitHub and someone can take a look. A device snapshot would help if
possible. Remember that MAC-Port mappings come from the switch, and MAC-IP
pairs come from the router (gateway) device.
For your second question, the configuration with two pollers will work fine
and Netdisco is designed to work that way (devices_only is the way to do
it!). Let us know in a ticket if you think it isn't working!
The web interface and database are shared and can be hosted anywhere and
will work for all devices. You can have multiple poller backends on
different machines (even shared with web and DB as you have) and they can
have distinct devices to poll (as you have) or overlap or be fully
redundant, it will work fine.
regards
Oliver
On Thu, 27 Apr 2023 at 12:00, Gallavardin Antoine <
antoine.gallavar...@inrae.fr> wrote:
> Hello
>
> I installed last version of Netdisco ans it scan several device wich
> manage several ip network
>
> For some device I got all ip seen ( In IP inventory reports) and for each
> IP I got the equivalence MAC <=> IP for node
>
> But for some network I got no IP address and no equivalence IP <=> MAC (
> but network has been detected because I could selected the networdk like
> 10.10.10.0/27 in IP inventory.
>
> In the same time , Vlan members are not shown.
>
> So I think there is an snmp issue ( netdisco-do discover is correct) ,
> maybe mibs isn't present ( device is avaya 5510-24T)
>
> Maybe I miss somethings else ...
>
> Do you have any clue ?
>
>
> Another question about netdisco inside a distributed environnment
>
> I got 2 poller netdisco in too different place and one database
>
> - poller1 : DB + backend + web interface
> - poller2 : backend connected to poller1 database
>
> How could I do to tell to each poller to request only certain device
>
> Actually I declared all device in eache poller and I set the device_only
> parameters like this
>
> on poll1
>
> devices_only:
> - 'group:device_pool1_part1'
> - 'group:device_pool1_part2'
>
> on poll2
>
> devices_only:
> - 'group:device_pool2_part1'
> - 'group:device_pool2_part2'
>
>
> through Web Interface, If I plan a discover of a device from
> device_pool2_part1, Will netdisco launched discovering from pool2 ?
>
> Cheers
>
> Antoine
>
>
> --
> Antoine Gallavardin
> INRAE - SIIR Auvergne Rhone Alpes - DSI-INFRA
>
> _______________________________________________
> Netdisco mailing list
> netdisco-users@lists.sourceforge.net
> https://sourceforge.net/p/netdisco/mailman/netdisco-users/
--- End Message ---
_______________________________________________
Netdisco mailing list - Digest Mode
netdisco-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/netdisco-users
