Jason,
The interfaces should be unplumbed when you create the aggregation with
dladm:
ifconfig e1000g0 unplumb
ifconfig e1000g1 unplumb
dladm create-aggr -d e1000g0 -d e1000g1 5
--Dave
Jason J. W. Williams wrote:
Hi Sebastien,
I'll have to take a look at dhcpagent. Wasn't involved in the actual
install process...I think my dev installed it with the Dev. Edition of
SX-CR. Playing with ifconfig I did completely unplumb and then
replumb (no IP address) the interfaces. Also, tried
unplumbing->modunload->modload->plumb. To no avail. dhcpagent is a
promising idea though. Thank you!
Best Regards,
Jason
On 2/28/07, Sebastien Roy <[EMAIL PROTECTED]> wrote:
Jason J. W. Williams wrote:
> I loaded Build 57 clean on a new X4600 and am having issues creating
> link aggregations. Its acting as if the e1000g driver is not GLDv3
> compatible: "dladm: create operation failed: Device busy (invalid
> interface name)"
This message is printed if one of the devices you're adding to the
aggregation has IP plumbed on it, or is in use by dhcpagent. The
message is misleading, and lacking in specifics. Make sure none of the
links in your aggregation are in use before creating the aggregation.
-Seb
_______________________________________________
networking-discuss mailing list
[email protected]
_______________________________________________
networking-discuss mailing list
[email protected]
