Hi , also for me this work around works, but only for non vlan traffic :-(
because the fix is bypassing the softmac kernel module, vlan interfaces on top of bcme will not work untill the bug is fixed (see mail below from Sebastien Roy) in fact this problem is a little bit funny, we (my company and I) are located in Belgium, our capital is Brussels, and what is causing this problem, yes right it's project Brussels :-) Kristof > Hi Sebastian, Cathy >> >> while non vlan traffic on bcme0 & bcme1 is now OK, I cannot get vlan >> interfaces up and running (the can be plumed, but no traffic is >> received :-( ) > Right, VLAN support was added by the softmac kernel module introduced by > Clearview UV, which acts as a shim to bring bcme under the GLDv3 > framework. The workaround bypasses that framework and causes ifconfig > to open bcme devices directly. Until this bug is fixed, VLANs on top of > bcme won't work. >> Any idea if there is a fix/work around for this issue?? >> > I know that Cathy is investigating a fix, which may involve working with > Broadcom to update the driver. According to Cathy, the bug appears to > be that sending raw Ethernet frames to a bcme device doesn't work, and > the softmac module depends on t This message posted from opensolaris.org _______________________________________________ networking-discuss mailing list [email protected]
