Sorry for making this confusing here is lil more description
Following is my ifconfig o/p
Code:
e1000g2363000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu
1500 index 11
inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
ether 0:15:17:8e:d8:a4
groupname GUN2363
e1000g2363000:1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu
1500 index 11
inet 10.21.88.28 netmask fffffc00 broadcast 10.21.91.255
e1000g2363000:2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu
1500 index 11
inet 10.21.88.41 netmask fffffc00 broadcast 10.21.91.255
e1000g2363002: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu
1500 index 7
inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
groupname GUN2363
ether 0:15:17:8e:d6:42 Vlan Tagged interfaces are configured with Link
based IPMP. IPMP works fine. but when i try to do traceroute for
10.21.88.28/10.21.88.41
it uses just the same interface e1000g2363000:1 for tracing both the ips when i
IPMP is enabled.
Code:
# traceroute 10.21.88.28
traceroute: Warning: Multiple interfaces found; using 10.21.88.28 @
e1000g2363000:1
traceroute to 10.21.88.28 (10.21.88.28), 30 hops max, 40 byte packets
1 hazels0ap1.emrsn.com (10.21.88.28) 0.270 ms 0.100 ms 0.094 ms
usmtnz-sinfsi04# traceroute 10.21.88.41
traceroute: Warning: Multiple interfaces found; using 10.21.88.28 @
e1000g2363000:1
traceroute to 10.21.88.41 (10.21.88.41), 30 hops max, 40 byte packets
1 robins0ap1.emrsn.com (10.21.88.41) 0.278 ms 0.103 ms 0.094 ms i want
e1000g2363000:1 for 10.21.88.28 & e1000g2363000:2 for 10.21.88.41
So is there a way to get this .. as my application team has hardcoded the
e1000g2363000:1 interface for 10.21.88.28 and e1000g2363000:2 10.21.88.41.
It works if i disable the IPMP group.
Let me know if you want more details on this.[color="#738fbf"]
--
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
