Hello,
I found on snv134 that the link permissions of the property "mtu" are not
updated, even if they are writable
---
r...@nexenta3:/volumes# dladm show-linkprop e1000g0
LINK PROPERTY PERM VALUE DEFAULT POSSIBLE
...
e1000g0 mtu r- 9000 1500 1500-9216
...
r...@nexenta3:/volumes# dladm set-linkprop -p mtu=4000 e1000g0
dladm: warning: cannot set link property 'mtu' on 'e1000g0': link busy
r...@nexenta3:/volumes# ifconfig e1000g0 down
r...@nexenta3:/volumes# dladm set-linkprop -p mtu=4000 e1000g0
dladm: warning: cannot set link property 'mtu' on 'e1000g0': link busy
r...@nexenta3:/volumes# ifconfig e1000g0 unplumb
r...@nexenta3:/volumes# dladm set-linkprop -p mtu=4000 e1000g0
r...@nexenta3:/volumes# dladm show-linkprop e1000g0
LINK PROPERTY PERM VALUE DEFAULT POSSIBLE
...
e1000g0 mtu r- 4000 1500 1500-9216
...
r...@nexenta3:/volumes# ifconfig e1000g0 plumb
r...@nexenta3:/volumes# ifconfig e1000g0
e1000g0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 9000 index 19
inet 0.0.0.0 netmask 0
ether 0:15:17:cc:f2:ef
Hardware is:
Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller
(Copper)
PCI ID: 8086:10bc (rev 06)
---
Any hints ? Is this a Bug ? Where to track this ?
Regards,
Robert
--
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
