I can't send the output to you. My modem nor anything else is configured.
Once I get into the GUI then maybe I could start using some of this output.
Basically what it tries to do is set a whole bunch of screen resolutions,
and each one comes up with could not find screen. It tries all of them, and
then it crashes, with that error message.
neil
----- Original Message -----
From: Axalon Bloodstone <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, August 27, 1999 6:15 AM
Subject: Re: [newbie] Video problems
> On Fri, 27 Aug 1999, JK wrote:
>
> > I am running a number nine I128 with four megs of ram. my monitors hsync
is
> > 30-95 and vsync is 47-150
> > res is 1600x1200 max
> >
> > When I was running RH 6.0 it could handle 1280x1024 at 24 bpp now I am
trying
> > to set my monitor to the same res and depth, but it will only hit max of
> > 1280x1024 at 8 bpp....
> >
> > Any help on what I can do to fix that little problem? I am using
mandrake 6.0
> >
> > TIA
> >
> > John K.
>
> Get the manual for the monitor, look in the front or back for its's
> specific hsync/vsync. Edit /etc/X11/XF86Config and and replace the current
> hsync/vsync. If that doesn't work send the full output from startx
>
> --
> MandrakeSoft http://www.mandrakesoft.com/
> --Axalon
>
