Re: [newbie] Modem Troubles!

[Mark Ewing]

Sounds like the IRQ is set incorrectly. I have no experience with ISAPNP but i know if I don't use setserial to change it to look for my modem on IRQ 5 instead of 4 where it thinks the modem is, I get the same problems you said. Check where setserial is looking and compare it to whatever the modem is set for. Hope this helps, let me know if you need any more info, Mark   ----- Original Message ----- From: Donny To: [EMAIL PROTECTED] Sent: Tuesday, August 31, 1999 9:38 PM Subject: [newbie] Modem Troubles! Hey everyone! Im having some terrible modem problems! My modem recently got fried by lightning... and the new one i got to replace it, turned out to be a plug-n-play modem.   Well, i got the latest version (1.8) of ISAPNP. Linux sees my modem (i think). IM using KPPP to dial up my ISP, but when it initializes the modem withthe string ATZ, it waits for the response OK... it never gets it. I can go edit the modem commands, and take out the "OK" response. Now it passes the initialization, and starts to dial out. After it finishes dialing and connection, it stops at "waiting for response: CONNECT"   PLEASE HELP! Whats the problem? Are the responses set wrong? Or is it something else? Thanks for your time!