Chuck Stuettgen wrote: > >I can't seem to get mt CD-RW to work. I've tried Gnome Toaster, >X-CDRoast and GCombust. Nothing seems to work. The drive works fine >under Windows 2000 and I can record without problem. When I try it >using cdrecord from the command line I get the following: > >----------------------------------------------------- >Cdrecord 1.10 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 Jörg >Schilling >TOC Type: 1 = CD-ROM >scsidev: '0,0,0' >scsibus: 0 target: 0 lun: 0 >Linux sg driver version: 3.1.20 >Using libscg version 'schily-0.5' >atapi: 1 >Device type : Removable CD-ROM >Version : 0 >Response Format: 1 >Vendor_info : 'SONY ' >Identifikation : 'CD-RW CRX700E ' >Revision : '1.4h' >Device seems to be: Generic mmc CD-RW. >Using generic SCSI-3/mmc CD-R driver (mmc_cdr). >Driver flags : SWABAUDIO >Drive buf size : 8377856 = 8181 KB >FIFO size : 4194304 = 4096 KB >Track 01: data 650 MB >Total size: 746 MB (73:59.06) = 332930 sectors >Lout start: 747 MB (74:01/05) = 332930 sectors >Current Secsize: 2048 >ATIP info from disk: > Indicated writing power: 4 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type A, high Beta category (A+) (3) > ATIP start of lead in: -11079 (97:34/21) > ATIP start of lead out: 359849 (79:59/74) >Disk type: Long strategy type (Cyanine, AZO or similar) >Manuf. index: 11 >Manufacturer: Mitsubishi Chemical Corporation >Trying to clear drive status. >cdrecord: Drive needs to reload the media to return to proper status. >Re-load disk and hit <CR> >Blocks total: 359849 Blocks current: 359849 Blocks remaining: 26919 >Starting to write CD/DVD at speed 4 in dummy mode for single session. >Last chance to quit, starting dummy write in 0 seconds. Operation >starts. >Waiting for reader process to fill input buffer ... input buffer ready. >cdrecord: Input/output error. read track info: scsi sendcmd: no error >CDB: 52 01 00 00 00 FF 00 00 1C 00 >status: 0x2 (CHECK CONDITION) >Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0 >Sense Key: 0x5 Illegal Request, Segment 0 >Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 >Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 >(not valid) field ptr 0 >cmd finished after 0.008s timeout 240s >Writing time: 0.025s >Fixating... >WARNING: Some drives don't like fixation in dummy mode. >Fixating time: 0.003s >cdrecord: fifo had 64 puts and 0 gets. >cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. >------------------------------------------------------------------- > >Anyone have any ideas? > > > > >------------------------------------------------------------------------ > >Want to buy your Pack or Services from MandrakeSoft? >Go to http://www.mandrakestore.com > Well, several
1. Is your interface in set for CABLE SELECT position? If so it is likely to fail 2. Is DMA enabled for the drive? 3. Are you set for -dao? Many drives will not work in Disk-At-Once but are fine with Track-At-Once. Civileme
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
