Hi all, I am using Mandrake 9.0 with a Samsung 232B burner. I cannot make this work. I get various errors that started with "OPC Failure". In my attempts at figuring this out, I think I messed up the permissions. Now I can access the burner as root only. Even in root I get errors. I've tried CLI cdrecord, Gcombust, Gtoaster, X-CDRoast. Following is the latest log from Gcombust as I tried a fast blank of a CD-RW. I tried to blang the CD twice and got different errors?????
**first try"" Cdrecord 1.11a36 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.6' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'SAMSUNG ' Identifikation : 'CD-R/RW SW-232B ' Revision : 'R300' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 5554176 = 5424 KB scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Linux sg driver version: 3.1.24 Current Secsize: 2048 ATIP start of lead out: 1166730 (03:18/30) Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 1166880 Forcespeed is OFF. Starting to write CD/DVD at speed 10 in dummy BLANK mode for single session. /usr/bin/cdrecord: Input/output error. blank unit: scsi sendcmd: no error CDB: A1 01 00 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 9600s /usr/bin/cdrecord: Cannot blank disk, aborting. **second try** Cdrecord 1.11a36 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.6' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'SAMSUNG ' Identifikation : 'CD-R/RW SW-232B ' Revision : 'R300' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 5554176 = 5424 KB Current Secsize: 2048 ATIP start of lead out: 1166730 (03:18/30) Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 1166880 Forcespeed is OFF. Starting to write CD/DVD at speed 10 in real BLANK mode for single session. scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Linux sg driver version: 3.1.24 Performing OPC... /usr/bin/cdrecord: OPC failed. This burner works fine under Windows. I *hate* having to boot Windows to burn a disk. Please, someone tell me what might be wrong. I'll worry about the permission problem later, right now I just want the darned thing to work at all. Thanks, Linus
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
