What I meant was the cable coming from eth1, where eth0 has the direct 
connection from the cable modem. In other words, when I plug from eth1 to 
the wireless router, that's when the scenario (I described below) occurs: 
I can hit the linux box, but can't get beyond. If I plug from eth1 
directly to laptop (thereby rendering the wireless router useless), I get 
beyond just the linux box and can surf the web. 

TIA,
-Russ-

> When you say plug the cable into your wireless router are you then
> bypassing
> the main linux computer and going from laptop to router? If so you need
> to
> change the gateway IP on your laptop from the PC to the routers IP
> address
> cause the router has now become the gateway. Can you clarify what you
> are
> trying to do, or does my image above reflect what you are doing? HTH
> Dennis
> M.
-----Original Message-----
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Fri, 6 Jun 2003 12:38:47 -0700
Subject: RE: [newbie] Need help with router setup

> 
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Russ Rollins
> Sent: Friday, June 06, 2003 1:58 PM
> To: [EMAIL PROTECTED]
> Subject: [newbie] Need help with router setup
> 
> 
> I have setup the Mandrake Internet Sharing connection and am
> successfully able to utilize the second NIC in my box to share the
> internet with my laptop. However, when I plug the cable into my
> Wireless Router, and then attempt to get online with my laptop
> (wirelessly) I am unable to do so--I, however can successfully see my
> Mandrake box (@192.168.1.1) and peruse my webpages there. What can I
> do to fix this? I've spent hours trying to get this far (finally
> realizing I needed to open the ports in the firewall to allow DHCP).
> 
> Much thanks in advance,
> -Russ-
> 
> When you say plug the cable into your wireless router are you then
> bypassing
> the main linux computer and going from laptop to router? If so you need
> to
> change the gateway IP on your laptop from the PC to the routers IP
> address
> cause the router has now become the gateway. Can you clarify what you
> are
> trying to do, or does my image above reflect what you are doing? HTH
> Dennis
> M.
> 
> 
> 
> 




*********************************
Get your free E-Mail and Homepage
Go to http://www.networld.com
*********************************


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to