On Sat, 2003-06-07 at 12:07, Poogle wrote: > Referring to http://snapscan.sourceforge.net/, you may or may not need the > edit /etc/sane.d/snapscan.conf in respect of the firmware, but if you do you > have edited it correctly. > Next do cat /proc/bus/usb/devices > and you should get something like this :- > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 > B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB OHCI Root Hub > S: SerialNumber=d8934000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 > P: Vendor=06bd ProdID=2097 Rev= 1.00 > S: Manufacturer=AGFA > S: Product=SNAPSCAN > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > > make sure the lines P - I above are similar to yours, if they are not > http://snapscan.sourceforge.net/ tells you what you need to do. > http://www.poogle.co.uk >
When I do cat /proc/bus/usb/devices I get exactly that, except for the ProdID that is different from yours e26. My ProdID 0x208f is similar to that shown on http://snapscan.sourceforge.net/ so that part seems to be in order. Marco
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
