On Tuesday 03 June 2003 03:32 pm, [EMAIL PROTECTED] wrote: > Ron, go into the install software mode and do a search for dhcp. You need > dhcpcommon and dhcpclient and the dhcpd if I recall. Not sure but any one > of those can be a show stopper if not installed. HTH Dennis M. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Ronald J. Hall > Sent: Tuesday, June 03, 2003 3:22 PM > To: [EMAIL PROTECTED] > Subject: Re: [newbie] Need Cable-modem help! > > On Tuesday 03 June 2003 10:53 am, Derek Jennings wrote: > > Is the connection via Ethernet? > > If so just turn on DHCP and thats it done! > > > > derek > > Yes, its hooked to eth0. This is odd, I just went into MCC - services and > according to that, dhcp is turned on, set to run at boot, but is currently > stopped. None of the buttons from the MCC services section would start it. > > I also tried (as su) "service dhcpd start"...and stop, and restart. Also > used > "dhcp". Still no difference. > > Any ideas? Thanks! :-) Now I will not send any more e-mails from work. The tags said it was set as plain text and it still sent out as HTML. Oustlooks is for the birds. As are most things M$ -- Dennis M. linux user #180842
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com