On Tue, 2003-07-15 at 09:55, Miark wrote:
> lm80-i2c-0-2d
> Adapter: SMBus Via Pro adapter at 5000
> Algorithm: Non-I2C SMBus adapter
> +5V: +4.00 V (min = +4.50 V, max = +0.00 V) ALARM
> VTT: +2.00 V (min = +1.71 V, max = +2.09 V) ALARM
> +3.3V: +2.54 V (min = +2.97 V, max = +3.63 V) ALARM
> +Vcore: +0.44 V (min = +2.52 V, max = +3.08 V) ALARM
> +12V: +13.52 V (min = +10.80 V, max = +13.20 V) ALARM
> -12V: -7.08 V (min = -8.56 V, max = -6.48 V)
> -5V: -2.54 V (min = -3.38 V, max = -2.16 V) ALARM
> fan1: 10629 RPM (min = 6000 RPM, div = 1)
> fan2: 11344 RPM (min = 6000 RPM, div = 1)
> temp: +127.00 °C (hot:limit = +6°C, hysteresis = +5°C) ALARM
> (os: limit = +6°C, hysteresis = +5°C) ALARM
> alarms: Board temperature input (LM75) ALARM
> alarms: Chassis intrusion detection ALARM
Firstly, I don't think your fans run at 10k+ rpm - unless it's a new fan
that I ain't seen'ner'heard of yet...
Secondly, are you sure you setup lm_sensors properly in the first place?
It's not that it's hard, but it can be a bit confusing.
You can always re-setup lm_sensors by re-running the sensors_detect
script, and then following through with all the directions; I had to do
this twice before it got right as I was getting basically the same BS as
you just posted.
Now that mine is setup properly and I know exactly how to go through
with this every install, you should get something a bit more legible
like the following:
lm80-i2c-0-2d
Adapter: SMBus Via Pro adapter at 0400
Algorithm: Non-I2C SMBus adapter
+5V: +3.84 V (min = +5.53 V, max = +0.00 V) ALARM
VTT: +1.43 V (min = +1.90 V, max = +1.67 V) ALARM
+3.3V: +2.08 V (min = +3.13 V, max = +3.46 V) ALARM
+Vcore: +1.27 V (min = +1.80 V, max = +1.99 V) ALARM
+12V: +12.95 V (min = +11.37 V, max = +12.57 V)
-12V: -6.21 V (min = -12.40 V, max = -11.20 V)
-5V: -2.19 V (min = -5.16 V, max = -4.64 V)
fan1: 10546 RPM (min = 6000 RPM, div = 1) ALARM
fan2: 6818 RPM (min = 6783 RPM, div = 1)
temp: -128.00 °C (hot:limit = +6°C, hysteresis = -82°C) ALARM
(os: limit = -92°C, hysteresis = -31°C) ALARM
alarms: Board temperature input (LM75) ALARM
alarms: Chassis intrusion detection ALARM
eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 0400
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 256
eeprom-i2c-0-51
Adapter: SMBus Via Pro adapter at 0400
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 256
eeprom-i2c-0-52
Adapter: SMBus Via Pro adapter at 0400
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 256
via686a-isa-0c00
Adapter: ISA adapter
Algorithm: ISA algorithm
CPU core: +1.42 V (min = +1.98 V, max = +2.49 V) ALARM
+2.5V: +1.02 V (min = +2.36 V, max = +2.25 V) ALARM
I/O: +3.25 V (min = +2.14 V, max = +2.86 V) ALARM
+5V: +4.94 V (min = +4.92 V, max = +3.01 V) ALARM
+12V: +11.74 V (min = +6.59 V, max = +10.79 V) ALARM
CPU Fan: 3409 RPM (min = 3000 RPM, div = 2)
P/S Fan: 0 RPM (min = 3000 RPM, div = 2)
SYS Temp: +32.0°C (limit = +45°C, hysteresis = +40°C)
CPU Temp: +30.3°C (limit = +60°C, hysteresis = +55°C)
SBr Temp: +21.4°C (limit = +65°C, hysteresis = +60°C)
--
Tue Jul 15 10:25:01 EST 2003
10:25:01 up 1 day, 2:28, 2 users, load average: 0.07, 0.20, 0.24
-----------------------------------------------------------------
| __ __ |kuhn media australia |
| /-oo /| |'-. |http://kma.0catch.com |
| .\__/ || | | |================================|
| _ / `._ \|_|_.-' |stephen kuhn |
| | / \__.`=._) (_ | email: [EMAIL PROTECTED] |
-----------------------------------------------------------------
linux user #:267497 linux machine #:194239 * MDK 9.1+ & RH 9
Mandrake Linux Kernel 2.4.21-11mdk Cooker for i586
-----------------------------------------------------------------
* This message was composed on a 100% Microsoft free computer *
All five-second grenade fuses will burn down in three seconds
-- Murphy's Military Laws n118
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
