Thanks Chris and Stephen! One thing I noticed is I didn't do the ISA probe. That's already made a difference. My current reading is 61°C, which may be correct, cuz it's warm in my office, the CPU is kinda busy right now, and my box isn't cooled as well as it could be.
I guess I should re-boot, check the temp in the bios when the the machine is idle, then check it against lm sensors when idle in Linux. Then if it's still wrong, I'll try Tom's lm75 trick. Miark > Subject: Re: [newbie] lm sensors is lying > Date: Mon, 14 Jul 2003 19:24:33 -0500 > From: Chris <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > > On Monday 14 July 2003 06:55 pm, Miark wrote: > > Here's my sensors output. Note the temperature of 127°C. Call me > > crazy (shut up, Stephen) but I think this is probably inaccurate :-) > > > > How do I fix the reading? > > Ahh, mine looked exactly like this until Tom Brinkman stepped in and lent a > hand. Try this: If you're usin 'lm80' in rc.local, try 'lm75', or vice > versa. lm75 should be better for kt133 chipsets. > > That fixed my problem and my sensors output looked exactly like yours before > I made the change. > > # I2C adapter drivers > modprobe i2c-viapro > modprobe i2c-isa > # I2C chip drivers > modprobe lm75 > modprobe eeprom > modprobe via686a > > Hope this helps ya. > > -- > Regards > Chris > A 100% Microsoft free computer > Registered Linux User 283774 http://counter.li.org > 7:22pm up 23 days, 1:36, 6 users, load average: 0.24, 0.20, 0.14 > > ------------------------------------------------------- > > -- > Regards > Chris > A 100% Microsoft free computer > Registered Linux User 283774 http://counter.li.org > 8:02pm up 23 days, 2:16, 6 users, load average: 0.07, 0.10, 0.09 >
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
