I am having still problem with hdd speed. [EMAIL PROTECTED] lvgandhi]# hdparm /dev/hda
/dev/hda: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 2434/255/63, sectors = 39102336, start = 0 [EMAIL PROTECTED] lvgandhi]# hdparm -tT /dev/hda /dev/hda: Timing buffer-cache reads: 128 MB in 0.37 seconds =345.95 MB/sec Timing buffered disk reads: 64 MB in 4.17 seconds = 15.35 MB/sec [EMAIL PROTECTED] lvgandhi]# hdparm -i /dev/hda /dev/hda: Model=ST320413A, FwRev=3.39, SerialNo=6ED1JBLC Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39102336 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: device does not report version: 1 2 3 4 I have following lines in dmesg. blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff) ide0: Speed warnings UDMA 3/4/5 is not functional. blk: queue c03cb55c, I/O limit 4095Mb (mask 0xffffffff) ide0: Speed warnings UDMA 3/4/5 is not functional. inserting floppy driver for 2.4.21-0.13mdk It is shown as 100ATA in bios while booting. hdparm -X 69 /dev/hda also doesn't help. What to do? -- L.V.Gandhi 203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017 MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com