Le May 9, 2004 06:49 am, Derek Jennings a écrit : > On Sunday 09 May 2004 05:13, Marc Lijour wrote: > > Le May 7, 2004 04:41 am, Derek Jennings a écrit : > > > On Friday 07 May 2004 05:41, Marc Lijour wrote: > > > > Would you know what to do in order to make the firmware uploaded > > > > automatically as soon as the device is detected on the USB port? > > > > > > > > At this point I have to use fxload manually each time I boot. > > > > > > To make a kernel module load automatically on inserting a USB device > > > edit /etc/hotplug/usb.usermap > > > Copy the format from an existing device. You will need the usb > > > vendor/product codes of your device which you will see somewhere in > > > dmesg, or install and run usbview and it will tell you the codes. > > > > Hi derek > > > > in this file it is written that it is automatically generated (by what I > > do not know!), and actually there are multiple line for my backpack. In > > spite of these lines it is not recognized. > > Do the vendor/product codes in the file match your backpack? > What do you see in /var/log/syslog when you insert the usb cable?
I get that (at the end of usb.usermap): bpckusb 0x0003 0x0ac9 0x0000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x1000 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x1001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x1002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x1003 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x1004 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x1005 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x1006 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x1007 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x0010 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 bpckusb 0x0003 0x0ac9 0x0011 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 ------------------------ AND --------------------- [EMAIL PROTECTED] hotplug]# cat /proc/bus/usb/devices T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.3-9mdk uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1f.4 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c506 Rev=16.00 S: Manufacturer=Logitech S: Product=USB Receiver C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.3-9mdk uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1f.2 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=058f ProdID=9254 Rev= 3.12 S: Manufacturer=ALCOR S: Product=Generic USB Hub C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0ac9 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms I: If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms E: Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl=1ms E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=04b8 ProdID=011f Rev= 1.07 S: Manufacturer=EPSON S: Product=EPSON Scanner C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
