Not sure if this will work for wireless, but I had two boxes with fresh 10.0 installs in which I had to disable network hotplugging to get any internet access to work. Paul On Monday 03 May 2004 12:55 am, Teilhard Knight wrote: > Hello: > > Derek Jennings, in this list, led me through the process of enabling > Internet > for Mandrake 9.2 and a wireless adapter. I now have another computer which > I want to run with Mandrake 10.0, but the configuration which worked in 9.2 > doesn't work for this version. > > What Derek taught me: Mandrake (9,2) loads 2 drivers for the wireless > adapter (SMC 2662W VS..3) I have plugged in that computer: > "atmelwlandriver", > and "at76c503c". The problem was to exclude the first and use the second. > He had more than one ways to do it. > > First, write the lines: > > usbvnet_rfmd > usbvnet_r505_2958 > > in /etc/hotplug/blacklist. > > Then, make a configuration file for wlan0 in /etc/sysconfig/network-scripts > called /fcfg-wlan0, which is this one: > &&&&&&&&&&&&&&&&&&&&&&&&&&& > DEVICE=wlan0 > > BOOTPROTO=static > > IPADDR=172.16.1.36 > > NETMASK=255.255.0.0 > > NETWORK=172.16.0.0 > > ONBOOT=yes > > BROADCAST=172.16.255.255 > > WIRELESS_ENC_KEY=94:41:94:54:75 > > WIRELESS_RATE=11M > > WIRELESS_MODE=managed > > WIRELESS_ESSID=2WIRE193 > > &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& > > Either I made a mistake, or I have to do things in a different way for > 10.0. > > Derek, if you find you can have a little time for considering this, I will > appreciate it. > > Teilhard.
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________