Well there is your problem. The Ethernet is not coming up. If eth0 is not
listed when you do ifconfig, then it means the driver has not loaded.
Do you see the ethernet listed in the
MandrakeControlCentre>>HardwareHardware
list?
What driver does it use? What is your hardware?
Here is all the information it listed:
vendor: Realtek
Bus: PCI Bus identification: 10ec:8139:1462:577c
Location on the bus: 1:c:0
Description: RTL-8139
Module: 8139too
media class: network internet
It is possible that a BIOS problem could be preventing the driver loading.
The
first step in resolving BIOS issues is in
MandrakeControlCentre>Boot>BootLoader Uncheck the 'Enable ACPI' box and
check
the 'Force noAPIC' box Click Next>Finish, then reboot.
Neither enabled nor disable were checked, so I checked noAPIC and saved all
of that.
_________________________________________________________________
Check out the coupons and bargains on MSN Offers! http://youroffers.msn.com
____________________________________________________
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________
