--Brent,
Well Bro. I quite don't know how to figure it out but thanks for the info...godbless..
Jay
On Wed, 05 Jan 2000 00:37:42 Dennis wrote:
>On Tue, 04 Jan 2000 00:50:55 -0500 (EST), you wrote:
>
>>Hey guys,
>> I dont know what the deal is with this SCSI card. Its an AHA-152x and
>>linux-mandrake 6.1 just wont pick it up at all, not even in the install
>
>If the card is a AHA-1520, than it has selectable IRQ and address as
>well as a multiple of other jumpered selections. Any of which if you
>have made the wrong selection could cause Linux not to detect it.
>Check your jumpers on the card and first make sure that you arent
>conflicting with another IRQ or address. See if you have enabled or
>disabled the bios on the card. That can make a difference.
>
>>procedure. Which is wierd to me because the linux-mandrake web page says its
>>compatible. I've got a CD-RW on it (i dont know if that means anything).
>
>Its one of the more basice scsi cards supported. Which makes me
>believe you have something jumpered wrong on the card.
>
>>Well, if you guys have any ideas or have had troubles with this kind of card
>>before and know what to do please help!! Or if you do have the same card and
>>its working fine any info on the way your adaptec bios is set up would help
>>too. Thanks a lot.
>>
>>~Brent
>
>
LYCOShop is now open. On your mark, get set, SHOP!!!
http://shop.lycos.com/
