Man I must be fried!!
add a .o to the
insmod /lib/mod*/2*/net/ne
as in
insmod /lib/mod*/2*/net/ne.o
"Ronald J. Yacketta" wrote:
>
> 1) try insmod /lib/mod*/2*/net/ne2000
> if you dont get an error message then try
> modprobe ne2000
> you should see something like this
> eth0 Link encap:Ethernet HWaddr 00:E0:29:2E:AA:27
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> Interrupt:10 Base address:0xb800
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
> RX packets:38727 errors:0 dropped:0 overruns:0 frame:0
> TX packets:38727 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
>
> if that all works you can take an easy route and use linuxconf to add
> the mod for eth0
> 1) linuxconf
> 2) networking
> 3) Basic Host Information
> 4) hit the tab key until your in the Kernel Module field
> 4a) press ctrl-x
> 4b) select ne2000
> 5) if your useing dhcp select dhcp
> 6) Enabled
> 7) tab to accept (hit return)
> 8) tab to quit (hit return)
> 9) tab to quit (hit return)
> 10) Select Activate changes (hit return)
> 11) tab to quit (hit return)
>
> now you can type ifconfig -a and now the above eth0 should look
> something like:
> eth0 Link encap:Ethernet HWaddr 00:E0:C5:F4:08:3A
> inet addr:24.161.66.121 Bcast:24.161.67.255
> Mask:255.255.252.0
> UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
> RX packets:70757 errors:0 dropped:0 overruns:0 frame:0
> TX packets:51835 errors:0 dropped:0 overruns:0 carrier:0
> collisions:931 txqueuelen:100
> Interrupt:9 Base address:0xb400
> if the eth0 looks like the one after the insmod/modprobe above type
> ifup eth0 and then ifconfig -a
>
> Ron
>
> 3)
> Peter Hecht wrote:
> >
> > Hello,
> >
> > I have just installed LM6.1. I was not able to get my Allied
> > Telesyn AT1510 Ethernet Adapter installed. This is a problem.
> >
> > I would like to get the card recognized. It is an NE2000
> > compatible card, but that selection on the install was not
> > recognized. So, I am hoping I will be able to patch my install
> > to "see" the NIC.
> >
> > Thanks,
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Talk to your friends online with Yahoo! Messenger.
> > http://im.yahoo.com