Greetings:
I have just installed Mandrake Linux 6.1 w/XFree86 3.3.5. on a Dell
Dimension PC using the i810e chipset. I am attempting to upgrade my video
drivers so I can use a higher resolution in X.
I am following the rpms and release notes downloaded from the Intel support
site. All has gone well until step 5 of the X Server installation section
of the notes. The agpart.o file appears to compile ok into the
/usr/src/RPM/BUILD/ directory, but the rpm that should be created there is
not found.
The rebuild trace is posted below.
Does anyone have any idea what those unresolved references at the end are
about???
Many thanks in advance -- mflood
[EMAIL PROTECTED]
[root@localhost floppy]# rpm --rebuild I810Gtt*.src.rpm
Installing I810Gtt-0.1-6.src.rpm
Executing: %prep
+ umask 022
+ cd /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ rm -rf I810Gtt-0.1
+ /bin/mkdir -p I810Gtt-0.1
+ cd I810Gtt-0.1
+ tar -xvvf -
+ /bin/gzip -dc /usr/src/RPM/SOURCES/I810Gtt.tar.gz
-rw-r--r-- root/root 4415 2000-04-13 16:18:21 Makefile
-rw-r--r-- root/root 698 1999-08-31 16:56:20 README
-rw-r--r-- root/root 20181 1999-10-12 04:02:01 agpgart.c
-rw-r--r-- root/root 3101 1999-09-27 19:35:30 agpgart.h
-rw-r--r-- root/root 2943 1999-09-28 08:59:48 testgart.c
-rw-r--r-- root/root 106 1999-10-12 03:53:45 version-test.c
-rwxr-xr-x root/root 50 1999-10-12 03:55:22 version-test.sh
+ STATUS=0
+ '[' 0 -ne 0 ']'
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,g-w,o-w .
+ exit 0
Executing: %build
+ umask 022
+ cd /usr/src/RPM/BUILD
Linux_i810_6_2.rpm..rpmy + /bin/mkdir -p I810Gtt-0.1 I + tar
-xvvf - HÑ+ make 'OPT_CFLAGS=-O6 -fomit-frame-pointer -fno-exceptions
-fno-rtti -pipe -s -mpentiumpro -mcpu=pentiumpro -march=pentiumpro
-ffast-math -fexpensive-optimizations -malign-loops=2 -malign-jumps=2
-malign-functions=2 '
gcc -O6 -fomit-frame-pointer -fno-exceptions -fno-rtti -pipe -s
-mpentiumpro -mcpu=pentiumpro -march=pentiumpro -ffast-math
-fexpensive-optimizations -malign-loops=2 -malign-jumps=2
-malign-functions=2 -DMODULE -D__KERNEL__ -I/usr/src/linux/include -pipe
-fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2
-DHAVE_MTRR -c -o agpgart.o agpgart.c
+ exit 0
Executing: %install
+ umask 022
+ cd /usr/src/RPM/BUILD
+ cd I810Gtt-0.1
+ make RPM_INSTALL=1 install
+ grep '^/lib/modules/'
+ echo /usr/local/include/agpgart.h
+ exit 0
Processing files: I810Gtt
Two files on one line: /lib/modules/2.2.13-7mdk/misc/wavefront.o:
File must begin with "/": unresolved
Two files on one line: /lib/modules/2.2.13-7mdk/misc/wavefront.o:
File must begin with "/": symbol(s)
Two files on one line: /lib/modules/2.2.13-7mdk/misc/eicon.o:
File must begin with "/": unresolved
Two files on one line: /lib/modules/2.2.13-7mdk/misc/eicon.o:
File must begin with "/": symbol(s)
PreReq: /bin/sh
[root@localhost floppy]# rpm -Uvh /usr/src/RPM/BUILD/I810Gtt*.i386.rpm
error: cannot open file /usr/src/RPM/BUILD/I810Gtt*.i386.rpm
[root@localhost floppy]#
