Try using a crossover cable.
----- Original Message -----
From: "Jaguar" <[EMAIL PROTECTED]>
To: "Linux Newbie" <[EMAIL PROTECTED]>
Sent: Saturday, August 12, 2000 10:20 PM
Subject: [newbie] Broadcast IP from ETH1
> Cyrix P233
> Abit m/b
> 64 Ram
> Cirrus Logic 6465 4MB (could be off a little on the chipset)
> Linux MDK 7.1
> 3Com 509B (eth0)(tried swapping the NIC's with NO change)
> 3Com 503 (eth1)
> 12 port hub
>
> I have been trying to share my cable modem, but unsuccessfully. I have no
> problem setting up eth0 and eth1, all the parameters go in fine. However
the
> link light on my hub does NOT light up from eth1. I have tested the hub,
it
> works correctly.
> I setup eth0 for DHCP (static IP), and used the 192.168 series for the
local
> network(eth1). Both NIC's show up fine in "ifconfig", but the NIC doesn't
> seem to be sending to the hub. Anyone know what might be the problem?
> TIA
> Jaguar
>
> The Dogma chased the Stigma, and was hit by the Karma.
>
> ____________________________________________________________________
> Get your own FREE, personal Netscape WebMail account today at
http://webmail.netscape.com.
>
