Glenn Holden escribió:
> Ok - When I ifup eth0, it returns "Delaying eth0 initialization"
> I checked my ifconfig - it is setup
> When I cat /procs/interrupts, eth0 is still not listed.
> Reboot doesn't do anything. (Too used to using Win, I had to try it.)
Is your ethernet card supported by Mandrake? If so have you already configured
it through DrakConf -> Network -> Connection ?
If your card is up and running you should see eth0 on when running ifconfig:
--------------
[root@quinipc download]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:60:67:73:83:09
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19548 errors:0 dropped:0 overruns:0 frame:0
TX packets:19279 errors:6 dropped:0 overruns:0 carrier:12
collisions:5 txqueuelen:100
RX bytes:24067198 (22.9 Mb) TX bytes:2004792 (1.9 Mb)
Interrupt:7 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:508 errors:0 dropped:0 overruns:0 frame:0
TX packets:508 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:51742 (50.5 Kb) TX bytes:51742 (50.5 Kb)
[root@quinipc download]#
--------------
and lsmod should show your ethernet's card driver loaded (mine is 8139too):
--------------
[root@quinipc download]# lsmod
Module Size Used by
sr_mod 15008 1 (autoclean)
isofs 18560 1 (autoclean)
sb 7632 0
sb_lib 34448 0 [sb]
uart401 6544 0 [sb_lib]
sound 57984 0 [sb_lib uart401]
soundcore 4080 5 [sb_lib sound]
scanner 7424 0 (unused)
printer 5824 0
usb-uhci 21616 0 (unused)
usbcore 49728 1 [scanner printer usb-uhci]
8139too 12384 1 (autoclean)
ide-scsi 7904 1
nls_iso8859-1 2880 3 (autoclean)
nls_cp850 3632 2 (autoclean)
vfat 9552 2 (autoclean)
fat 31424 0 (autoclean) [vfat]
reiserfs 168480 3
initio 19388 2
sd_mod 11284 2
scsi_mod 91100 4 [sr_mod ide-scsi initio sd_mod]
[root@quinipc download]#
--------------
Hope that helps ;)
> Thanks
> Glenn
>
> >-----Original Message-----
> >From: etharp [mailto:[EMAIL PROTECTED]]
> >Sent: Thursday, August 23, 2001 4:35 AM
> >To: [EMAIL PROTECTED]; Glenn Holden
> >Subject: Re: [newbie] How do I test my NIC?
> >
> >
> >On Wednesday 22 August 2001 23:37, Glenn Holden wrote:
> >> Thanks Matt
> >> ifconfig and ping both return some data, but I think it's just a local
> >> loopback. When I ifconfig eth0, I get No such device.
> >> Where/how do I configure the eth0?
> >> Glen
> >first, the command to start an interface is ifup so if you try
> >ifup eth0 you
> >would get a message that could not start, then type netconf as root, in a
> >text console. you will be able to steup your network, if you know all the
> >settings anf type of card, etc. MAKE SURE your bios is set to plug
> >and pray
> >aware OS to "off"
> >
> >
> >
> >
> >
> >
> >
> >
> >> >-----Original Message-----
> >>
> >> From: [EMAIL PROTECTED]
> >>
> >> >[mailto:[EMAIL PROTECTED]]On Behalf Of Matt Greer
> >> >Sent: Wednesday, August 22, 2001 9:02 PM
> >> >To: [EMAIL PROTECTED]
> >> >Subject: Re: [newbie] How do I test my NIC?
> >> >
> >> >--- Glenn Holden <[EMAIL PROTECTED]> wrote:
> >> >> My NIC tests ok with it's software. How can I be
> >> >> sure the correct drivers,
> >> >> etc. are configured? How do I test it?
> >> >
> >> >as root, type "ifconfig" from a console. Your nic
> >> >should pop up with an ip address.
> >> >
> >> >Then i'd ping the loopback address ("ping 127.0.0.1")
> >> >and your nic's ip address for good measure.
> >> >
> >> >If you pass all three tests you should be good to go.
> >> >
> >> >Matt
> >> >
> >> >__________________________________________________
> >> >Do You Yahoo!?
> >> >Make international calls for as low as $.04/minute with Yahoo! Messenger
> >> >http://phonecard.yahoo.com/
> >
> >----------------------------------------
> >Content-Type: text/plain; charset="us-ascii"; name="message.footer"
> >Content-Transfer-Encoding: 8bit
> >Content-Description:
> >----------------------------------------
> >
>
> ------------------------------------------------------------------------
> Want to buy your Pack or Services from MandrakeSoft?
> Go to http://wwww.mandrakestore.com
--
Joan Tur. Ibiza - Spain
[EMAIL PROTECTED] [EMAIL PROTECTED] ICQ 11407395
Joan.Tur.pagina.de www.ClubIbosim.org
Linux: usuari registrat 190.783
Want to buy your Pack or Services from MandrakeSoft?
Go to http://wwww.mandrakestore.com
