On Tuesday 28 May 2002 12:41 pm, you wrote: > Does anyone have any good FAQ links for the Mandrake SNF 7.2 build, > other than the one on Mandrake's site? > > Also, I have a problem with the firewall itself. I have the firewall > setup in the diagram attached. I have static routes in the init.rc > startup script, because I am unable to get routed or gated to receive > any RIPv1 or RIPv2 broadcasts from my Cisco 2621 routers. Every time > I try to start routed with the -q or -a switch (whichever switch is > for listening only), routed says it cannot bind to address. > > Anyway, I can access the firewall via the web management interface, > and also via SSH. The problem is that my clients on any of the > 192.168 networks cannot get out to the Internet. I have allowed DNS > (UDP only), HTTP, HTTPS, FTP, SSH, SFTP, and SFC. Can anyone tell me > what could be going on? > BTW, I can get out to the Internet from the firewall by both pinging > an IP address (both the Internet DNS server and the IP address of > 208.208.208.208), and by running the TEST INTERNET CONNECTION from > the list after logging into the console with admin. > > I have not installed any of the security updates, as this causes a > problem when restarting the system as it hangs on bringing up the > ETH2 interface. Can anyone recommend how to install the security > updates/patches? > > Thanks, > > Chris > > > PS. My apologies to the mod, as I don't have a website to upload the > image (only 20kb). OOps! hit the mouse button at the wrong moment, so previous message resembles the inner workings of my brain. Have you set up the LAN so that all of the system knows what the gateway address is?. You don't mention a gateway device. Just curious and hope to help. -- Dennis M. linux user #180842
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
