Hi,
I have a Lexar usb thumb drive that won't allow for any user except
root to access it.
Where should I be looking for proper permissions to be set ?
As I understand it, is this HAL related ?
[with LE2005 - 2.6.11-6mdk-i686-up-4GB kernel]

After inserting it:
#> ls -l /mnt/
drwxr-xr-x   2 root root  4096 Apr 24 16:18 LEXAR_MEDIA

..and I have to mount it with #>mount /mnt/LEXAR_MEDIA)
#> ls -l /mnt/
drwxr--r--   5 root root 16384 Apr 24 15:55 LEXAR_MEDIA

syslog shows this when I plug it in:
Apr 24 16:18:27 peace kernel: usb 3-5: new high speed USB device
                  using ehci_hcd and address 5
Apr 24 16:18:27 peace kernel: scsi4 : SCSI emulation for USB Mass
                  Storage devices
Apr 24 16:18:27 peace kernel: usb-storage: device found at 5
Apr 24 16:18:27 peace kernel: usb-storage: waiting for device to
                  settle before scanning
Apr 24 16:18:32 peace kernel:   Vendor: LEXAR     Model: JUMPDRIVE
                  SPORT   Rev: 1000
Apr 24 16:18:32 peace kernel:   Type:   Direct-Access
                  ANSI SCSI revision: 00
Apr 24 16:18:32 peace kernel: SCSI device sdb: 506880 512-byte hdwr
                  sectors (260 MB)
Apr 24 16:18:32 peace kernel: sdb: Write Protect is off
Apr 24 16:18:32 peace kernel: sdb: Mode Sense: 43 00 00 00
Apr 24 16:18:32 peace kernel: sdb: assuming drive cache: write through
Apr 24 16:18:32 peace kernel: SCSI device sdb: 506880 512-byte hdwr
                  sectors (260 MB)
Apr 24 16:18:32 peace kernel: sdb: Write Protect is off
Apr 24 16:18:32 peace kernel: sdb: Mode Sense: 43 00 00 00
Apr 24 16:18:32 peace kernel: sdb: assuming drive cache: write through
Apr 24 16:18:32 peace kernel:  /dev/scsi/host4/bus0/target0/lun0: p1
Apr 24 16:18:32 peace kernel: Attached scsi removable disk sdb at
                              scsi4, channel 0, id 0, lun 0
Apr 24 16:18:32 peace kernel: usb-storage: device scan complete
Apr 24 16:18:32 peace scsi.agent[10883]: disk at
/devices/pci0000:00/0000:00:02.2/usb3/3-5/3-5:1.0/host4/target4:0:0/4:0:0:0
Apr 24 16:18:33 peace fstab-sync[10915]: added mount point
                /mnt/LEXAR_MEDIA for /dev/sdb1

This is what syslog says when I remove it:
Apr 24 16:17:26 peace kernel: usb 3-5: USB disconnect, address 4
Apr 24 16:17:26 peace fstab-sync[10787]: removed mount point
                /mnt/LEXAR_MEDIA for /dev/sdb1

I dont see anything in MCC for msec anymore and can't seem to find
any settings for these perms. Any hints where to look ?
Any help is greatly appreciated.
-- 
RickS

____________________________________________________
Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________

Reply via email to