On Friday 11 November 2005 05:53 pm, jim allAn wrote:
>    I finally got a new external modem.  I didn't get it to work yet
> and could use some help there.  Where do I start?  Below are some
> things I know about the modem if it would help.  I know also I need
> to use a dialogue setup.  I got that far but it still wouldn't dial
> out.  I probably need to install it into my linux 8.2 setup.  I tried
> modemdrake in safe mode but got no results as you probably know.
> Mousedrake got my mouse out of the corner recently is why I tried
> modemdrake.
>
> Hawkings 56k usb pn680u
> v-90 voice data fax modem
>    A modem query, in windoze, yields
> ATQ0V1E0 - OK
> AT+GMM - USB V.90 FAX MODM
>        Ver2.92.04
> AT+FCLASS=? - 0,1,8
> AT#CLS=? - 0,1,8
> AT+GCI? - +GCI:B5
> AT+GCI=? -
> +GCI:(B5,02,07,09,0A,0C,0F,16,1A,1B,20,25,26,2D,2E,31,36,B8,3C,3D,42,4
> 6,50,51,52,53,54,57,58,59,00,5E,61,62,64,69,6C,70,73,77,7B,7E,82,83,84
> ,88,89,8A,8B,8E,98,9C,9F,A0,A1,A5,A6,A9,AD,AE,B3,B4,B7,BC)
> ATI1 - USB V.90 FAX MODM
>        USB SERIES
>        Ver2.92.04
> ATI2 - USB SERIES
>        Ver2.92.04
>        MV (CID\SPK)
> ATI3 - USB SERIES
>        ST7554
> ATI4 - Active Profile:
>        S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002
> S07=060
>        S08=002 S09=006 S10=128 S11=100 S12=050 S13=000 S14=000
> S15=001
>        S16=001 S17=000 S18=000 S19=000 S20=000 S21=000 S22=000
> S23=000
>        S24=050 S25=000 S26=000 S27=008 S28=000 S29=001 S30=002
> S31=001
>        S32=034 S33=009 S34=034 S35=000 S36=000 S37=000 S38=000
> S39=002
>        S40=000 S41=002 S42=000 S43=000 S44=000 S45=251 S46=000
> S47=000
>        S48=000 S49=000 S50=000 S51=000 S52=000 S53=000 S54=000
> S55=000
>        S56=004 S57=000 S58=000 S59=000 S60=001 S61=000 S62=001
> S63=000
>        S64=000 S65=000 S66=000 S67=000 S68=000 S69=000 S70=000
> S71=000
>        S72=019 S73=003 S74=153 S75=000 S76=004 S77=010 S78=000
> S79=070
>        S80=070 S81=000 S82=002 S83=055 S84=000 S85=000 S86=000
> S87=000
>        S88=001
> ATI5 - Stored Profile 0:
>        Not defined
> ATI6 - Stored Profile 1:
>        Not defined
> ATI7 - Country: USA
>        Serial Number: 0
>        Protocol Factor: 0
It's a USB modem that is going to be a problem ,A serial modem would have no 
problem.
Lets try 
As root type mcc 
go to set up a new network 
Click on modem connection 
if your modem is not detected [not likely] click on manual choice see if you 
have a usb connection listed
HTH


-- 
Diplomacy is the art of saying "Nice doggie" until you can find a rock.
Will Rogers

____________________________________________________
Want to buy your Pack or Services from Mandriva? 
Go to http://store.mandriva.com
Join the Club : http://www.mandrivaclub.com
____________________________________________________

Reply via email to