On Monday, July 17, 2006, 4:34:28 AM, Rick Kunath wrote: Got a chance to spend a little bit of time on it....
RK> On the final network, did you reboot the cable or DSL modem to RK> clear out the old machine's MAC address, so that the modem will RK> DHCP another? Tried rebooting the router - no difference, another port, the same. I brought along another network card, put it in and it worked right away. I'm not sure why the on-board net connection worked just fine on my LAN but not there. Anyway, it was a quick and dirty solution. RK> When you installed the printer, did you configure it using the RK> Mandrake CUPS GUI configuration tool in the Mandriva Control RK> Center, or some other way? Is this a parallel port connected RK> printer, or a network printer? Tried a manual install of the recommended printer driver [after the net was working], but no go - still won't print. Tried a couple of alternate drivers too, but no luck. Seems to find the right printer, so I assume the parallel port is OK. Still chuggin away..... -- rikona mailto:[EMAIL PROTECTED] ____________________________________________________ Want to buy your Pack or Services from Mandriva? Go to http://store.mandriva.com Join the Club : http://www.mandrivaclub.com ____________________________________________________
