Hi, the card is AGP first of all. Second here is the full error:
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: FreeBSD 4.5-RELEASE i386 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Feb 8 11:22:08 2002
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "ctx"
(**) | |-->Device "xpert128"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/l
ib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/
X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X
11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI unknown chipset (0x5446) rev 0, Mem @ 0xd4000000/26,
0xd9000000/14, I/O @ 0xc000/8
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Xpert 128 (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP),
ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
X connection to :0.0 broken (explicit kill or server shutdown).
as you can see it is XFree86 version 4.1.0 running on FreeBSD 4.5.
scanpci reports this:
pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x1002 device 0x5446
ATI Device unknown
Thanks!
----- Original Message -----
From: "Ted Spradley" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, February 08, 2002 10:51 AM
Subject: Re: [Newbie]ATI Xpert 128 Not Working
> > [EMAIL PROTECTED] wrote:
> >
> > Hi, I was reccomened by a few other people to use the xpert 128 in X
> > because it had good all around support. I chose Rage 128 as my card
> > and when I startx I get this error:
> [...]
> > (--) Assigning device section with no busID to primary device
> > (EE) No devices detected.
>
> Gack!! You did put the card into a slot in the box, didn't you? ;-)
>
> Does scanpci(1) find the video card? Is it listed in the spew of device
> identifications when your system boots up? You didn't tell us anything
> about what Operating System (Solaris? QNX?) you're running, nor what
> version of XFree86.
>
> > Here is my XF86Config file: any help is appreciated!
>
> That's not all of the file, is it?
>
> >
> >
> > # Device configured by xf86config:
> >
> > Section "Device"
> > Identifier "xpert128"
> > Driver "ati"
> > #VideoRam 16384
> > # Insert Clocks lines here if appropriate
> > EndSection
> >
> >
> > #
> > **********************************************************************
> > # Screen sections
> > #
> > **********************************************************************
> >
> > # Any number of screen sections may be present. Each describes
> > # the configuration of a single screen. A single specific screen
> > section
> > # may be specified from the X server command line with the "-screen"
> > # option.
> > Section "Screen"
> > Identifier "Screen 1"
> > Device "xpert128"
> > Monitor "CRX"
> > DefaultDepth 16
> >
> > Subsection "Display"
> > Depth 8
> > Modes "1024x768" "800x600" "640x480"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 16
> > Modes "1024x768" "800x600" "640x480"
> > ViewPort 0 0
> > EndSubsection
> > Subsection "Display"
> > Depth 24
> > Modes "1024x768" "800x600" "640x480"
> > ViewPort 0 0
> > EndSubsection
> > EndSection
>
> --
> Remember, more computing power was thrown away last week than existed in
> the world in 1982. -- http://www.tom.womack.net/computing/prices.html
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
>
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
