# fdisk /dev/hdc
You'll see something like this:Command (m for help):
hit 'p' and then copy that here. Then I can see which mount points are your windows drives.
Here's mine, btw. All Linux though. :T
Command (m for help): p
Disk /dev/sda: 255 heads, 63 sectors, 1106 cylinders Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 2 16033+ 83 Linux /dev/sda2 3 64 498015 82 Linux swap /dev/sda3 65 429 2931862+ 83 Linux /dev/sda4 430 1106 5438002+ 5 Extended /dev/sda5 430 551 979933+ 83 Linux /dev/sda6 552 1106 4458006 83 Linux
Command (m for help):
Then just quit out with 'q'.
Steve
Trent & Christy wrote:
I am running Red Hat 9 2.4.20-8 i686 on a new Dell Inspiron 1100
When I looked at /ect/fstab I found: (I had to retype it into the my mail in windows)
Label = 1 / ext3 defaults 11
None /dev/pts devpts gid=5, mode = 620 00
None /proc proc defaults 00
None /dev/shm tmpfs defaults 00
/dev/hdc6 swap swap defaults 00
/dev/cdrom /mnt/cdrom udf, iso 9660 noauto, owner, kudzu, ro 00
I couldn't figure out what you ment by "run lspci as root". I am still very unfamiliar with linux file system and structure.
In case it is of any use to you my partitions are:
hdc1:Dell
hdc2:Win
hdc3:Linux
hdc4: extended Intel
hdc5:FAT32
hdc6:swap
Thanks for answering quickly, Steve.
Trent
------------------------------------------------------------------------
_______________________________________________ newbies mailing list [EMAIL PROTECTED] http://phantom.byu.edu/cgi-bin/mailman/listinfo/newbies
_______________________________________________ newbies mailing list [EMAIL PROTECTED] http://phantom.byu.edu/cgi-bin/mailman/listinfo/newbies
