"# fdisk /dev/hdc" and "# lspci" aren't doing anything for me.  It
doesn't give me any errors, but it just goes strait to the next prompt
without any messages, tests, or windows.

What can I do to access the files on the widows and shared partitions?

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Steve Dibb
Sent: Friday, September 19, 2003 6:37 PM
To: Newbie Help
Subject: Re: [newbies] Accessing partitions

I'm sure there's an easier way to display the partitions, but I don't 
know what it is, so do this:

        # fdisk /dev/hdc
        
You'll see something like this:

        Command (m for help):

hit 'p' and then copy that here.  Then I can see which mount points are 
your windows drives.

Here's mine, btw.  All Linux though. :T

Command (m for help): p

Disk /dev/sda: 255 heads, 63 sectors, 1106 cylinders
Units = cylinders of 16065 * 512 bytes

    Device Boot    Start       End    Blocks   Id  System
/dev/sda1   *         1         2     16033+  83  Linux
/dev/sda2             3        64    498015   82  Linux swap
/dev/sda3            65       429   2931862+  83  Linux
/dev/sda4           430      1106   5438002+   5  Extended
/dev/sda5           430       551    979933+  83  Linux
/dev/sda6           552      1106   4458006   83  Linux

Command (m for help):

Then just quit out with 'q'.

Steve


Trent & Christy wrote:

> I am running Red Hat 9 2.4.20-8 i686 on a new Dell Inspiron 1100
> 
> When I looked at /ect/fstab I found: (I had to retype it into the my 
> mail in windows)
> 
> Label = 1       /               ext3            defaults

>         11
> 
> None            /dev/pts                devpts          gid=5, mode = 
> 620       00
> 
> None            /proc           proc            defaults

>         00
> 
> None            /dev/shm        tmpfs           defaults

>         00
> 
> /dev/hdc6       swap            swap            defaults

>         00
> 
> /dev/cdrom      /mnt/cdrom      udf, iso 9660 noauto, owner, kudzu, ro
00
> 
> I couldn't figure out what you ment by "run lspci as root".  I am
still 
> very unfamiliar with linux file system and structure.
> 
> In case it is of any use to you my partitions are:
> 
>         hdc1:Dell
> 
>         hdc2:Win
> 
>         hdc3:Linux
> 
>         hdc4: extended Intel
> 
>                 hdc5:FAT32
> 
>                 hdc6:swap
> 
> Thanks for answering quickly, Steve.
> 
> Trent
> 
> 
>
------------------------------------------------------------------------
> 
> _______________________________________________
> newbies mailing list
> [EMAIL PROTECTED]
> http://phantom.byu.edu/cgi-bin/mailman/listinfo/newbies


_______________________________________________
newbies mailing list
[EMAIL PROTECTED]
http://phantom.byu.edu/cgi-bin/mailman/listinfo/newbies


_______________________________________________
newbies mailing list
[EMAIL PROTECTED]
http://phantom.byu.edu/cgi-bin/mailman/listinfo/newbies

Reply via email to