I had this exact same problem on my 700. It turned out it was an old fuse physically falling apart on me. I wouldn't have figured that out without the wiring diagram from the factory manual. Pictures available on my blog. http://munz.kicks-ass.net/nighthawk/
On 7/8/09, ty <[email protected]> wrote: > > I have an 84 cb700. I love this bike and put a lot of work into it but > now I can't get it to start. After riding it several hundred miles > this summer all at once it wont start. The key is on. kill switch is > in run position, its in neutral, battery is charged, and lights are > on. I can jump the contacts on the silinoid and the engine will turn > over but there is no firing of the engine. I have removed the front > cowl and cleaned all the connectors but no luck. As I press the start > button the lights will dim slightly but I do believe there is plenty > of current. This did happen to me a couple of times earlier this year > and I thought it was the wiring so I replaced all the battery and > starter cables. I also had the battery load tested and the results > were good. Please, can anyone advise me on what to do or how to at > least test the various components. any help would be most welcome. > > > -- Sent from my mobile device -Kyle --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
