would that work for the tube that connects the carbs to the engine?



________________________________
From: Creative Residential Designs <[email protected]>
To: [email protected]
Sent: Saturday, July 18, 2009 8:33:38 AM
Subject: [Nighthawk Lovers] Re: 1984 NH650SC Carb Help

 
I also use WD-40 at the Y tubes and connecting 
tubes. Use a large screwdriver to pry up the edges and spray the WD-40 in 
there. 
Work it around by twisting the tubes a bit and they will pop off a lot easier. 
I 
can get my carbs off in 15 minutes these days. HotrodMamma.
----- Original Message ----- 
>From: Kyle Munz 
>To: [email protected] 
>Sent: Saturday, July 18, 2009 12:22 
>  AM
>Subject: [Nighthawk Lovers] Re: 1984 
>  NH650SC Carb Help
>
>You will disconnect the throttle cables and the choke cable at 
>  the carbs. You will need to remove the seat, sidepanels, gas tank, and 
>  anything else in your way. Loosen the airbox so you can slide it back out of 
>  the way, loosen the hose clamps and remove the Y-tubes between the airbox 
> and 
>  the carbs. Next is your choice, some loosen the clamps and gently yet firmly 
>  pry the carbs loose from the intake, others loosen the 8 allen screws and 
>  remove the intake along with the carb unit. I prefer the latter, I modified 
> an 
>  allen wrench with my bench grinder and can get to all of the allen screws 
> this 
>  way. Reinstallation is basically reversing the process. The Y-tubes are 
>  sometimes stubborn and need to be coerced with a heat gun or blow dryer to 
>  make them maleable enough to get back on.
>The question is what are you 
>  going to do once you get them off? Others on this list can give you better 
>  advice for that or a quick search of the archives.
>
>-Kyle 
> 
>
>
>
>On Sat, Jul 18, 2009 at 12:00 AM, Weston <[email protected]> >  wrote:
>
>
>>I need some advice on how to remove and reinstall a 
>>    1984 Honda
>>Nighthawk CB650SC four carb setup. What do I do with the 
>>    throttle
>>cables, what do I need to take off before I can remove the 
>>    setup? etc.
>>Thank you guys for all your 
>>  help.
>>
>>
>
>>>
>


      
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to