I would check it for flatness, you may have tweaked it and they maybe
the cause of it not sealing.  Another possibility is that the heat
from welding it may have warped the casting.

On Jul 2, 11:33 am, Noah Goodall <[email protected]> wrote:
> I don't know how I can massively screw up such a simple operation, but I
> did.  I changed the oil for the first time last week, but in the process I
> overtightened the filter cover when it's tab wasn't properly aligned with
> the matching slot.  They were overlapping, which caused the tab to snap off.
>  I took the filter cover and broken tab and had it welded back together, but
> the filter cover is still leaking oil.
>
> My question is this: is the problem with the filter cover (as in was it not
> welded properly and I need a whole new cover) or is it with the washer that
> goes between the spring and the filter itself (which wasn't even there when
> I first got to the filter, and apparently didn't come with the bike when I
> purchased it)?
>
> Any other advice would be greatly appreciated.  The bikes been not running
> for two weeks now and I'm dying to ride!
>
> Thanks,
> Noah

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.

Reply via email to