Drown it in penetrating oil, heat it with a torch, and keep an extractor handy.
-Kyle On Tue, Nov 30, 2010 at 8:52 AM, Javier Garcia <jajgar...@gmail.com> wrote: > Thanks for the info Graham. Now I have to figure out how to take the > exhaust out. One of the bolts won't is stuck and I am afraid of putting to > much pressure and brake it. Any ideas? > > Javier. > > > On Tue, Nov 30, 2010 at 9:41 AM, Graham Rogers <graha...@ptd.net> wrote: > >> I've found the most important part is removing all the rust >> >> >> On Nov 30, 2010, at 9:25 AM, greenzer...@gmail.com wrote: >> >> i was going to use bbq paint on the pipes and mufflers on the 250 (just >>> rusted up pretty good). At the time i had a job where we had a blast cabinet >>> almost large enough to put 1 side in at a time in and clean them up that >>> way, wasent going to prime or sand, just clean it up good, spray bomb, and >>> let it cure on the bike on the 45 min ride home.... Just never got around to >>> it >>> >>> >>> >>> -----Original Message----- >>> Date: Tuesday, November 30, 2010 8:14:47 am >>> To: nighthawk_lovers@googlegroups.com >>> From: "Graham Rogers" <graha...@ptd.net> >>> Subject: Re: [Nighthawk Lovers] Re: Black Chrome exhaust pipes for 700-S >>> (restoration) >>> >>> Javier, I've never had any peel off but I don't use primer, >>> specially regular primer. Maybe high heat primer would work but >>> regular wouldn't. I've used NAPA high heat, even Walmart's brand and >>> they all work. I use flat on exhausts (1200 degree plus) and semi >>> gloss or gloss (500 degree plus) on the mufflers. Sometimes as >>> someone commented black turns somewhat grey - depending on the brand >>> and I prefer a slight sheen on the exhausts and so some flats do >>> that. Stove or BBQ paint works as well, Graham >>> >>> On Nov 29, 2010, at 11:01 PM, Javier Garcia wrote: >>> >>> Graham, do you remember the names of any of the good brands? We >>>> painted the exhaust on the Suzuki, I don't if it was the primer or >>>> the paint, but it started to pill off right away. >>>> >>>> Javier. >>>> >>>> On Mon, Nov 29, 2010 at 10:31 PM, Graham Rogers <graha...@ptd.net> >>>> wrote: >>>> I've used to different brands of high heat paint on exhausts. Some >>>> work really well, others not so well. Joe, I know, would rather >>>> >>>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Nighthawk Motorcycle Lovers!" group. >>> To post to this group, send email to nighthawk_lov...@googlegroups.com. >>> To unsubscribe from this group, send email to >>> nighthawk_lovers+unsubscr...@googlegroups.com<nighthawk_lovers%2bunsubscr...@googlegroups.com> >>> . >>> For more options, visit this group at >>> http://groups.google.com/group/nighthawk_lovers?hl=en. >>> >>> >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to nighthawk_lov...@googlegroups.com. >> To unsubscribe from this group, send email to >> nighthawk_lovers+unsubscr...@googlegroups.com<nighthawk_lovers%2bunsubscr...@googlegroups.com> >> . >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> >> > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to nighthawk_lov...@googlegroups.com. > To unsubscribe from this group, send email to > nighthawk_lovers+unsubscr...@googlegroups.com<nighthawk_lovers%2bunsubscr...@googlegroups.com> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lov...@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
