I replaced mine with hex cap screws. Sent via BlackBerry by AT&T -----Original Message----- From: Sean Snell <[email protected]> Sender: [email protected] Date: Sat, 4 Feb 2012 14:26:11 To: <[email protected]> Reply-To: [email protected] Subject: Re: [Nighthawk Lovers] Re: '82 CB450SC project question(s)
Yeah, I ran into old rusted screws when I was sprucing up the carbs on my 82 650. Its worth the minimal investment to go to a hardware store with a couple of the old screws and replace them all with fresh ones, even if they're not that bad. I too used an EZ out bit with great success after stripping out a few of the screw heads. Sean On Feb 4, 2012 1:17 PM, "Kevin Green" <[email protected]> wrote: > Thanks for the assurances that soaking should help. I'm wishing I had > picked up an impact driver as recommended, but I don't know if it would > have helped me anyways. I was trying to loosen the last screw holding on > the top cover and thought it had come loose but it looks like I stripped it > instead. Will an impact driver still do me any good? Should I just drill > and use a screw extractor? > > [image: IMAG0260.jpg] > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
