Allen, I don't follow - what's not working on the turn signal control? I was confused how to cancel it until I realised you push the little lever down instead of in to cancel - or is it the other way round. Any way I think I have another one, I'll check and get back to you, Graham
On Sep 3, 2012, at 6:20 PM, Allen Thomas wrote: > I have a busted turn signal control unit on the GS1000, and the replacement > unit is $350 !!! It also is a 1 year only part which sucks which means there > are none to be found used.. Since I know that there are at least 1 EE on the > list, I’m begging for some help with circuit design. Assume I pretty much > know squat about circuits, I can read a diagram and I know what the parts > basically do, but when it comes to resistor, diode, and capacitor specs, I’m > totally lost. I’m attaching a color wiring diagram that seems to be correct > (here is a link if you can't read attachments). > https://picasaweb.google.com/102601857000444202563/GS1000OLBlue#5784078337381587170 > So basically the left hand control has two momentary switches (right, and > left) that connect + power to the control unit, and 1 momentary switch that > grounds the control unit to cancel the flashing. The control unit uses these > signals to do its magic. It has the connections to the flasher relay, and to > the lights. I don’t care whether the turn signals self cancel. I just need a > circuit that can take these inputs and work the lights. I’m thinking it > should be fairly easy to use an IC and have it work 2 relays to bridge the > signal coming from the turn signal relay. However I have no idea how to > program an IC chip. Any help would be greatly appreciated. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > To unsubscribe from this group, send email to > nighthawk_lovers+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > <scan79_GS850GN_schemAB_Edit.jpg> -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
