i never use air in them. and atf with a tablespoon of brake fluid. i just did mine yesterday. its 14.3 on right fork and 14.5 on the left. but if you have a canadian model it could possibly different???
On Thu, Sep 27, 2012 at 3:02 AM, Shane Townsend <[email protected]>wrote: > Thanks Allen > > On Wednesday, September 26, 2012 9:45:02 PM UTC+10, Allen wrote: >> >> I'm running a 50/50 mix of dextron and 30W oil in the GS. That is what >> the manual calls for! Works fine, straight ATF is about equal to 10W fork >> oil so the mixture I'm using is supposedly roughly 15W. >> Sent via BlackBerry by AT&T >> ------------------------------ >> *From: * Shane Townsend <[email protected]> >> *Sender: * nighthaw...@googlegroups.**com >> *Date: *Wed, 26 Sep 2012 04:14:25 -0700 (PDT) >> *To: *<nighthaw...@**googlegroups.com> >> *ReplyTo: * nighthaw...@googlegroups.**com >> *Subject: *[Nighthawk Lovers] What type of oil is used to fill forks >> after replacing seals? >> >> Any views on this.....ive heard from another site for the CB750/700SC >> auto transmission oil is as good as any......and can any one tell me how >> much is needed? >> >> Also topping up with 10 percent more alleviates the need to run air to >> recommended 6psi.....thoughts please! >> >> Shane >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to nighthaw...@googlegroups.**com. >> To unsubscribe from this group, send email to nighthawk_love...@** >> googlegroups.com. >> Visit this group at http://groups.google.com/** >> group/nighthawk_lovers?hl=en-**US<http://groups.google.com/group/nighthawk_lovers?hl=en-US> >> . >> >> >> > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > Visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en-US. > > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US.
