brake fluid is oil. yea it will mix with any oil. it keeps your seals better for longer. i used it in my spare car engine that had a leaking front main seal and it doesnt leak now.
On Thu, Sep 27, 2012 at 9:11 AM, Allen Thomas <[email protected]> wrote: > ** > Is brake fluid even soluble in oil?? Where did you get that recommendation? > Sent via BlackBerry by AT&T > ------------------------------ > *From: * nighthawkin <[email protected]> > *Sender: * [email protected] > *Date: *Thu, 27 Sep 2012 09:08:10 -0400 > *To: *<[email protected]> > *ReplyTo: * [email protected] > *Subject: *Re: [Nighthawk Lovers] What type of oil is used to fill forks > after replacing seals? > > i never use air in them. and atf with a tablespoon of brake fluid. i just > did mine yesterday. its 14.3 on right fork and 14.5 on the left. but if > you have a canadian model it could possibly different??? > > On Thu, Sep 27, 2012 at 3:02 AM, Shane Townsend <[email protected]>wrote: > >> Thanks Allen >> >> On Wednesday, September 26, 2012 9:45:02 PM UTC+10, Allen wrote: >>> >>> I'm running a 50/50 mix of dextron and 30W oil in the GS. That is what >>> the manual calls for! Works fine, straight ATF is about equal to 10W fork >>> oil so the mixture I'm using is supposedly roughly 15W. >>> Sent via BlackBerry by AT&T >>> ------------------------------ >>> *From: * Shane Townsend <[email protected]> >>> *Sender: * nighthaw...@googlegroups.**com >>> *Date: *Wed, 26 Sep 2012 04:14:25 -0700 (PDT) >>> *To: *<nighthaw...@**googlegroups.com> >>> *ReplyTo: * nighthaw...@googlegroups.**com >>> *Subject: *[Nighthawk Lovers] What type of oil is used to fill forks >>> after replacing seals? >>> >>> Any views on this.....ive heard from another site for the CB750/700SC >>> auto transmission oil is as good as any......and can any one tell me how >>> much is needed? >>> >>> Also topping up with 10 percent more alleviates the need to run air to >>> recommended 6psi.....thoughts please! >>> >>> Shane >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Nighthawk Motorcycle Lovers!" group. >>> To post to this group, send email to nighthaw...@googlegroups.**com. >>> To unsubscribe from this group, send email to nighthawk_love...@** >>> googlegroups.com. >>> Visit this group at http://groups.google.com/** >>> group/nighthawk_lovers?hl=en-**US<http://groups.google.com/group/nighthawk_lovers?hl=en-US> >>> . >>> >>> >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> Visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en-US. >> >> >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > Visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en-US. > > > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > Visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en-US. > > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US.
