Drill it out! If you have 2 of them then you can't mess anything up worse than it already is. Sent via BlackBerry by AT&T
-----Original Message----- From: Graham Rogers <[email protected]> Sender: [email protected] Date: Thu, 15 Aug 2013 18:24:39 To: Nighthawk Lovers<[email protected]> Reply-To: [email protected] Subject: [Nighthawk Lovers] Nighthawk 700S petcock Has anyone tried taking the petcock apart on the 700S. The diaphragm part is easy but I'm talking about grinding off the two rivets holding the lever in place. Both the 650 and 700S have rivets rather than screws. I tried two different petcocks and they both leaked just below the lever. So, they probably need cleaning and replacing the O ring ... but the plate is riveted on! Graham -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/groups/opt_out.
