I figured it'd be possible. I'm having a helluva time with this stud. There's maybe 3/4 " of the stud protruding from the head. It's a fairly tight squeeze to the stud. Maybe a 3/4" diameter circle around the area I have to work with. Could probably drop the exhaust to get a tiny bit more room off to one side.
Anyone tried one of those extractors that bites into the remaining stud and you use a ratchet to turn it out? Would I be be better off using the other type where you drill into the screw? I got a co worker of mine with a torch we could maybe weld a nut onto the stud or heat up the head and try it that way. Vice grips just slip off. Could be my cheap O ones I guess. And suggestions? -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
