Try opening the gas cap and then apply suction to the vacuum hose and see if fuel flows. Also, there are two nipples on the fuelcock that the vacuum line will fit onto so make sure you're connecting to the one that points to the side and not the one that points straight down.
-Kyle On Tue, Sep 8, 2015 at 8:32 AM, EGrider <gevan...@gmail.com> wrote: > I used a MixMizer syringe too to pull a vacuum on my Nighthawk to sync the > carbs. I got zero gas. The bike runs fine when the vacuum line is attached > to the carbs, however, so you may be experiencing the same thing. I didn't > put too much thought into it. If you just want to run the bike, you can > connect the hose from the MixMizer directly to the carbs and fill them up. > That's what I do. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to nighthawk_lovers+unsubscr...@googlegroups.com. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
