Hi all,
I've been given the loan of an N2020 while my F70 is in for
repair. I've figured out most of the knobs and dials, but
there are a few things I'd like to understand the meaning of.
Maybe somebody can help?
(a) On the shutter speed dial, there's the usual markings of
B, 1, 2, 4, 8..., 500, 1000, 2000, A. I know what they mean.
Next, there's "P dual", P and "P hi". I assume they're some
sort of programmed mode but what do they mean?
(b) Behind the shutter release button, there's a knob with two
settings. One is marked with a tiny square and the other
with the same square and the symbol for audio. When the
knob is at the square-alone setting, things act as normal
when shooting. When at the square-plus-audio setting, a
beep is heard when the shutter button is depressed (and for
as long as it remains depressed). What's this for?
(c) In between the above knob and the shutter speed dial, there's
a button labelled R. Close to it on the top and back of the
camera, there's a slide thingy also labelled R. I suspect
there are to enable the film to be rewound: slide the thingy
to the right and depress the R button and then start
rewinding the film using the rewind knob on the left-hand
side of the camera. Am I right?
(d) Finally, what sort of metering does this camera have? If
it has more than one metering mode, how does one set them?
Thanks for any help.
Bye,
Mike
[EMAIL PROTECTED]
www.NetworX.ie
---
