> I've been spending a bunch of time with a team at Texas Instruments doing similar.
I did a little bit with the msp430 line, it's good stuff. I seriously considered buying those $4.30 msp boards but my thesis got in the way. :( I wish the barriers to entry were lower for the platform (think Arduino-low) though. Speaking of arduino: Y'all know about the firmata library for node right? --Josh On Sat, Jan 12, 2013 at 3:48 PM, Rinie Kervel <rinie.ker...@gmail.com>wrote: > See http://jeelabs.org/2013/01/06/node-js-on-raspberry-pi/ > > Op vrijdag 11 januari 2013 10:47:24 UTC+1 schreef paul_tanner het volgende: > >> Hi, >> >> If you have no interest in IoT then this will not be relevant, sorry. >> >> Now that we have all these cheap and low-power linux platforms I want >> to use those for controlling custom hardware in the way we have used >> Arduino up to now. >> >> I recently tested node on Raspberry Pi and it seems to work great. I >> also tried the Mosquitto MQTT broker and its node module and also >> some hardware interfacing (written in C). >> >> The next step is to explore node "Addons" to make the hardware >> interfacing accessible to node. I have in mind to create some open >> source examples to take to the OSHUG meetup in March. >> >> While pondering that I wondered if any of you node folks have done >> this or are thinking about it. If so we should tallk. >> >> Thx. Paul >> >> -- > Job Board: http://jobs.nodejs.org/ > Posting guidelines: > https://github.com/joyent/node/wiki/Mailing-List-Posting-Guidelines > You received this message because you are subscribed to the Google > Groups "nodejs" group. > To post to this group, send email to nodejs@googlegroups.com > To unsubscribe from this group, send email to > nodejs+unsubscr...@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/nodejs?hl=en?hl=en > -- Job Board: http://jobs.nodejs.org/ Posting guidelines: https://github.com/joyent/node/wiki/Mailing-List-Posting-Guidelines You received this message because you are subscribed to the Google Groups "nodejs" group. To post to this group, send email to nodejs@googlegroups.com To unsubscribe from this group, send email to nodejs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/nodejs?hl=en?hl=en